ORP Oxidation-Reduction Potential Sensor
Reliable ORP Monitoring for Disinfection and Process Control
The iSOLV ORP100 Oxidation-Reduction Potential (ORP) Sensor provides accurate, real-time measurement of oxidation and reduction conditions in water and wastewater systems. Featuring a high-quality sensing electrode and stable reference system, it delivers reliable ORP readings that help assess disinfection effectiveness, chemical activity, and overall process performance.
Designed for drinking water, wastewater, and industrial water treatment applications, the ORP100 supports continuous monitoring of oxidation processes and chemical dosing control. With fast response, automatic temperature compensation, and a robust IP68-rated design, it offers dependable long-term operation in demanding environments. Available in flow cell and immersion configurations, the ORP100 is an ideal solution for maintaining water quality and optimising treatment efficiency.
- Range: -9999 / +9999. Turbidity Controller ATS500 allows the configuration of the minimum and the maximum value of the scale and decimal point position
- Measuring Unit: The user may select one of the proposed measuring units: %, NTU, FTU, mg/l, g/l, ppm, μS, mS, pH, mV, or edit any custom unit
- Display: The display shows the values of the measures and the messages which guide the user through set-up, configuration and during normal operation
- Keyboard: There are dedicated keys to directly access zero and sensitivity calibration as well as set point configuration
- Two Filters Software: The user can set two filters to obtain a stable reading and a faster response to the variations of the measurement in the process
- Operating Modes: Turbidity Controller ATS500 can operate in automatic, measure or simulated mode to facilitate start-up or maintenance
- Dual Analogue Outputs: Can be addressed to any input and programmable 0/4 – 20 mA on two points of the scale. They allow PID control or transmission of the measured values
- Two On/Off Regulators: Independent and addressable to any input with programmable set point on the scale
- PID Output: During PID control through the analogue output, the level of the actuation is displayed. The user can select an FM regulation (pulse frequency) or WM (pulse width) addressed to the assigned relay
- Logic Inputs: Two free voltage contacts can generate a hold or alarm condition
ATS500 Turbidity Analyzer is widely used in the following applications:
- Aquaculture
- Food and Beverage
- Chemical Industry
- Paper and Pulp
- Drinking Water
- Pharmaceutical
- Underground Water
- Electroplating
- Printing Industry
- Fertirrigation
- Swimming Pools
- Textile Industry
- Water Treatment
Request for a Quote
Complete the form below to get your free quote
Download Catalogue
Fill out the form below to download the catalogue.