High Purity Pressure Transducer – Model 223
Setra’s Model 223 ultra-high purity pressure transducer is designed for the most demanding specialty gas monitoring and control applications, where construction integrity, purity and performance cannot be sacrificed.
The 223 has a small, streamlined sensor chamber for easy purgeability. The sensor is designed to provide superior mechanical and thermal stability, especially in transient temperature conditions resulting from flowing gases. Isolation of the sensing element from the pressure.
In a typical Setra configuration, a compact housing contains two closely-spaced, parallel, electrically-isolated metallic surfaces, one of which is essentially a diaphragm capable of slight flexing under applied pressure. The diaphragm is constructed of low-hysteresis material such as 17-4 PH SS or a proprietary compound of fused glass and ceramic (Setraceramâ„¢). These firmly secured surfaces (or plates) are mounted so that a slight mechanical flexing of the assembly, caused by a minute change in applied pressure, alters the gap between them (creating, in effect, a variable capacitor). The resulting change in capacitance is detected by a sensitive linear comparator circuit (employing proprietary, custom-designed ASICs), which amplifies and outputs a proportional, high-level signal.
- Superior stability avoids downtime
- EMI/RFI immunity prevents false shutdown
- Sturdy design allows trouble-free installations
- Minimal torque effect
- High burst pressure ratings
- Easy purge-ability
- Meets CE conformance standards virtually insensitive to thermal transients in flow stream
- Virutally insensitive to thermal transients in fkiw stream (Joule-thompson eEffect)
- High Purity Gas Delivery
- Semiconductor Process Tools
- Pharmaceutical & Biotech Process
- Gas Cabinets
|Accuracy RSS* (At Constant Temp.)||±0.25% FS or ±1.0% of Reading|
|Non-Linearity, BFSL||±0.15% FS|
|Compensated Range °F(°C)||+15 to +150 (-9 to +65)|
|Zero Shift %FS/100°F(50°C)||2.0 (1.8)|
|Span Shift %FS/100°F(50°C)||2.0 (1.8)|
|Warm-up Shift||0.1% FS Total|
|* RSS of Non-Linearity, Non-Repeatability and Hysteresis.|
|Operating* °F (°C)||-40 to +185 (-40 to +85)|
|Storage °F (°C)||-40 to +185 (-40 to +85)|
|*Operating temperature limits of the electronics only. Pressure media temperatures may be considerably higher or lower.|
|Electrical Connection||6ft. Multiconductor Cable, or Bayonet Connector|
|Pressure Fittings||Refer to the catalogue|
|Zero/Span Adjustments||Side Access|
|Weight (Approx.)||5.6 ounces (160 grams)|
|Output*||4 to 20 mA**|
|External Load||0 to 800 ohms|
|Minimum supply voltage (VDC) = 10 + 0.02 x (Resistance of receiver plus line)|
Maximum supply voltage (VDC) = 30 + 0.004 x (Resistance of receiver plus line)
|*Calibrated at factory with a 24 VDC loop supply voltage and a 250 ohm load.|
**Zero output factory set to within ±.08mA.
**Span (Full Scale) output factory set to within ±.08mA.
|Liquids or gases compatible with 316L Stainless Steel|
Note: Specification are Subject to change without notice.